BAYANIN KYAUTATA:
Saukewa: A5.14
Yayi daidai da Takaddun shaida: AWS A5.14 ASME SFA A5.14
Tsarin walda: GMAW & ASAW Tsarin walda
Ana amfani da ERNiCrMo-10 don waldawa kayan tushe na nickel-chromium-molybdenum ga kansu, ƙarfe da sauran abubuwan haɗin ginin nickel, da kuma kayan kwalliyar ƙarfe.Ana iya amfani dashi don walda duplex, super duplex bakin karfe.
Abubuwan Bukatun Haɗin Kemikal AWS
| C = 0.015 max | Ku = 0.50 max |
| Mn = 1.0 max | Ni = Rago |
| Fe = 3.0 max | Co = 2.0 max |
| P = 0.04 max | Cr = 14.0 - 18.0 |
| S = 0.03 max | Mo = 14.0 - 18.0 |
| Si = 0.08 max | W = 0.50 max |
| Sauran = 0.50 max | Ti = 0.70 max |
Da fatan za a KIIRA DOMIN KARIN BAYANI DA MANYAN KYAUTA:
Aikace-aikace
Ana amfani da ERNiCrMo-7 don walda kayan tushe na nickel-chromium-molybdenum zuwa kanta, ƙarfe da sauran abubuwan haɗin nickel kuma don cladding karfe tare da kayan weld na NI-CR-MO
KYAUTA KYAUTA:
| Haɗin Kemikal % (Na yau da kullun) | ||
| C = 0.01 | Cr = 16.5 | Ni = Balance |
| Fe = 2.20 | Mo = 15.75 | |
| An Ajiye Duk Kayayyakin Karfe na Weld% (AW) | ||
| Ƙarfin Ƙarfin Ƙarfi | 113,00 psi | |
| Tsawaitawa | 29% | |
ABINDA AKE YIWA KYAUTA KYAUTA CHRPY-V-NOCH:
Bai dace ba
| Shawarar Ma'aunin Welding don MIG da SAW Welding na Nickel Alloys | ||||
| Tsari | Diamita na Waya | Voltage (V) | Amperage (A) | Gas |
| MIG | .035 inci | 26-29 | 150-190 | 75% Argon + 25% Helium |
| .045 inci | 28-32 | 180-220 | 75% Argon + 25% Helium | |
| 1/16 inci | 29-33 | 200-250 | 75% Argon + 25% Helium | |
| SAW | 3/32 inci | 28-30 | 270-350 | Za a iya amfani da madaidaicin Flux. |
| 1/8 inci | 29-32 | 350-450 | Za a iya amfani da madaidaicin Flux. | |
| 5/32 inci | 30-33 | 400-550 | Za a iya amfani da madaidaicin Flux. | |
