Nickel AlloyWaya WeldingTig WayaERNi-1
| Matsayi |
| TS EN ISO 18274 - Ni 2061 - NiTi3 |
| AWS A5.14 - ER Ni-1 |
Fasaloli da Aikace-aikace
Ana amfani da ER-Ni1 don waldawa da walƙiya na nickel 200 da nickel 201 gami.
Cikakke don haɗa Monel gami da jan ƙarfe-nickelalloys zuwa carbon steels.
Ni1 ya ƙunshi isassun titanium don sarrafa porosity na weld-karfe akan hanyoyin walda.
Yawanci ana amfani dashi a masana'antar sarrafa sinadarai, samar da fiber na roba & kayan sarrafa abinci da dai sauransu.
Kayayyakin Tushe Na Musamman
Nickel 200 da 201*
* Misali, ba cikakken lissafi ba
| Haɗin Sinadari% | ||||||
| C% | Mn% | Fe% | P% | S% | Si% | |
| max | max | max | max | max | max | |
| 0.05 | 0.80 | 0.70 | 0.030 | 0.010 | 0.75 | |
| Ku% | Ni% | Co% | Ti% | Al% | ||
| max | 93.00 | max | 2.00 | max | ||
| 0.20 | min | 1.00 | 3.50 | 1.00 | ||
| Kayayyakin Injini | ||
| Ƙarfin Ƙarfin Ƙarfi | ≥410 MPa | |
| Ƙarfin Haɓaka | ≥200 MPa | |
| Tsawaitawa | ≥30% | |
| Ƙarfin Tasiri | ≥ 100 J | |
Kaddarorin injina sun yi kusan kuma suna iya bambanta dangane da zafi, gas ɗin kariya, sigogin walda da sauran abubuwa.
Garkuwar Gas
TS EN ISO 14175 TIG: I1 (Argon)
Matsayin walda
TS EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG
| Bayanan tattara bayanai | |||
| Diamita | Tsawon | Nauyi | |
| 1.60 mm 2.40 mm | 1000 mm 1000 mm | 5 kg 5 kg | |
Alhaki: Duk da yake an yi duk ƙoƙarin da ya dace don tabbatar da daidaiton bayanan da ke ƙunshe, wannan bayanin yana iya canzawa ba tare da sanarwa ba kuma ana iya ɗaukarsa azaman dacewa da jagora gabaɗaya.
