Walda na ƙarfe mai jefa ƙarfeElektrode
Z508
GB/T EZNiCu-1
Bayani: Z508 lantarki ne na walda na ƙarfe mai siminti wanda ke da ƙarfe mai ƙarfe mai ƙarfe mai ƙarfe (Monel) da kuma rufin da aka yi masa graphitized. AC da DC masu amfani biyu, baka mai ƙarfi, mai sauƙin aiki. Ƙarfin kera shi da aikin yankewa sun kusa da Z308, amma saboda raguwar ƙarfe da aka ajiye, juriyar tsagewa ba ta da kyau. Ƙarfin haɗin da aka haɗa yana da ƙasa, don haka bai dace da walda na sassan da aka matse ba.
Aikace-aikace: Ana amfani da shi don gyaran walda na simintin ƙarfe mai launin toka wanda ba ya buƙatar ƙarfi mai yawa.
Sinadarin sinadarai na ƙarfen walda(%):
| C | Si | Mn | Fe | S | Ni | Cu | Wasu |
| 0.35 ~ 0.55 | ≤0.75 | ≤2.3 | 3.0 ~ 6.0 | ≤0.025 | 60 ~ 70 | 25 ~ 35 | ≤1.0 |
Shawarar da ake bayarwa:
| Diamita na sanda (mm) | 3.2 | 4.0 | 5.0 |
| Walda na yanzu (A) | 90 ~ 110 | 120 ~ 150 | 160 ~ 190 |
Sanarwa:
1. Dole ne a gasa wutar lantarki na tsawon awa 1 a kusa da 150℃ kafin a fara aiki da walda;
2. Lokacin walda, yana da kyau a yi amfani da hanya mai kunkuntar, kuma tsawon kowace walda bai kamata ya wuce 50mm ba. Nan da nan a bugi walda da ƙaramin guduma don rage damuwa a yankin gyaran walda da kuma hana tsagewa bayan walda.
An kafa Wenzhou Tianyu Electronic Co., Ltd. a shekara ta 2000. Mun kasance muna ƙera na'urorin lantarki na walda, sandunan walda, da kumakayan amfani da waldas na tsawon shekaru sama da 20.
Manyan kayayyakinmu sun haɗa da na'urorin walda na bakin karfe, na'urorin walda na ƙarfe na carbon, na'urorin walda na ƙarancin alloy, na'urorin walda na saman, na'urorin walda na nickel & cobalt, na'urorin walda masu laushi da ƙarancin alloy, na'urorin walda na bakin karfe, na'urorin walda masu kariya daga iskar gas, na'urorin walda na aluminum, na'urorin walda na arc da ke ƙarƙashin ruwa, na'urorin walda na nickel & cobalt, na'urorin walda na tagulla, na'urorin walda na TIG & MIG, na'urorin walda na tungsten, na'urorin walda na carbon, da sauran kayan haɗin walda da abubuwan amfani.
